Bearing CRO-8010

  • Bearing CRO-8010
  • Bearing CRO-8010
  • Bearing CRO-8010
  • Bearing CRO-8010
  • Bearing CRO-8010
  • Bearing CRO-8010
  • Bearing CRO-8010
  • Bearing CRO-8010
  • Bearing CRO-8010
  • Bearing CRO-8010
  • Japan Germany USA
  • Original Cerificate
  • <>CRO-8010
  • One Set
  • Check with us
  • Standard packaging
  • Within 4 working days
  • L/C
  • Check with us
Send Message
More Product Details

Lion Machinery Pty Ltd supplies more than 550 single-row, precision, Four Row Tapered Roller Bearings NTN in its online catalog with bores ranging from as small as 10.0 mm and as large as 280 mm. Standard contact angles of deflection include: 15, 20, 25, 30, and 40 with other custom angles available to meet special applications. Furthermore, ceramic and special SV30 stainless steel materials are also available to maximize performance.

Four Row Tapered Roller Bearings NTN mainly bear radial and axial combined loads. The bearing capacity of the bearing depends on the raceway angle of the outer ring. The larger the angle, the greater the load carrying capacity. Bearing CRO-8010 is a split type bearing, which is divided into single row, double row and four row tapered roller bearings according to the number of rows of rolling elements in the bearing. The clearance of single-row tapered roller bearings needs to be adjusted by the user during installation; the double-row and four-row tapered roller bearing clearances are given according to user requirements when the product leaves the factory, and no user adjustment is required.
Bearing CRO-8010 have a conical inner ring and an outer ring raceway, and tapered rollers are arranged between the two. The projection lines of all conical surfaces converge at the same point on the bearing axis. This design makes tapered roller bearings particularly suitable for bearing composite (radial and axial) loads. The axial load capacity of the bearing is mostly determined by the contact angle α; the larger the angle α, the higher the axial load capacity. The angle size is expressed by the calculation coefficient e; the larger the e value, the larger the contact angle, and the greater the applicability of the bearing to the axial load.
Bearing CRO-8010 are usually of a separate type, ie a conical inner ring assembly consisting of an inner ring with a roller and cage assembly can be mounted separately from the outer bevel (outer ring).
The secondary reason for the emergence of tapered roller bearings in the process of installation is that the bearing is being assembled, the inner ring and the outer ring are slanted during assembly; or the load is in the process of assembly and assembly, and the bearing is formed. .
When the Four Row Tapered Roller Bearings NTN is being installed, it should be stopped according to the working specifications. If a lot of achievements are not formed, if the form or method of the device is not used, the bearing raceway surface and the bone surface will form a wound-like line. The deep groove ball bearing device indirectly reflects the precision, life and function of the bearing.
Although the quality of Bearing CRO-8010 is better in all aspects, rolling bearings are precision components, and their use must be carried out with caution. No matter how high-performance bearings are used, if not used properly, the expected high performance will not be achieved. The following precautions for the use of bearings are as follows:
(1) Keep the Four Row Tapered Roller Bearings NTN and its surroundings clean:
Even small dust that is invisible to the eyes can have a bad effect on the bearings. Therefore, keep the area clean so that the dust does not intrude into the bearing.
(2) Use with caution:
In the use of the tapered roller bearing strong impact, it will produce scratches and indentations, which is the cause of the accident. In severe cases, it will crack and break, so you must pay attention.
(3) Use the appropriate operating tools:
Avoid using existing tools instead and use the right tools.
(4) Pay attention to the corrosion of Bearing CRO-8010 :
When operating the bearing, the sweat on the hand can cause rust. Be careful to use a clean hand, it is best to wear gloves as much as possible.

Writing a Message
  • Please Enter your Subject.
  • Please enter Your valid email address.
Your inquiry content must be between 20 to 5000 characters.